Learn how to make Chinese chili oil (Chinese chili sauce), the essential seasoning for lots of Chinese cuisines, especially Szechuan-style dishes. And Elaine gets the secrets of making the perfect Chinese chili oil with strong enough flavor and bright red color.

how to make chili oil|chinasichuanfood.com

What’s Chinese red oil

Chinese chili oil is also called red oil in China. It combines seasoning using red pepper, Sichuan peppercorn, mixed spices, ginger, and toasted sesame seeds. High-temperature oil is usually used to stimulate the pungent aroma of red pepper powder. But meanwhile, it brings dark red color instead of bright red color. We will add red pepper powder in two batches, poured over with oil at different temperatures. High-temperature oil can simulate a strong aroma while lower-temperature oil brings us a bright red color. Traditionally people in Sichuan first toast red peppers and then break them by hand using a stone grinder. But now we directly buy red pepper powders from the supermarket and this homemade Chinese chili oil can be finished within 10 minutes.

how to make chili oil|chinasichuanfood.com

Types of pepper flakes

Our most concerns about the pepper flakes are how spicy they are, the aromatics, and the color. We love to combine different types, 3 even 4 types, of chili peppers to make the flakes for chili oil. Just for your information, I love to mix Er Jing Tiao (aroma and color), Bullet Head (aroma), and Facing heaven(hotness). If you are in the US, you can go to this shop and find those ingredients.

But it is ok to use easy-to-find chili flakes, even not-so-hot types can work fine with this chili oil. I use a store-bought toasted chili flake and the result is quite amazing too. So my suggestion is to use your familiar type. But read the instruction and see whether the chili pepper is toasted already. If not yet, pan-fry the pepper flakes over a slow fire until aromatic. “Toasting in a small amount of oil” is the key factor that influences the taste and flavor.

A tip about keeping the color

One of the common failures of making chili oil might be the bitter taste bought by the over-high oil temperature. At the same time, the lovely bright red color will be lost too. On one hand, we need the oil to be hot enough to activate the aroma of the pepper flakes, on the other hand, we need to be very careful to avoid burned pepper flakes. When where is the balance? It is extremely hard to control this if you only chili oil only once a time or even twice. This experience can only be formed hundreds of times. So here comes my solution!

It is extremely simple and I am amazed by the result. Prepare some clean water (or boiled water after cooked) and wet the pepper flakes first. This method has also been used in Laziji, a local popular mala chicken. We soak the chili peppers first before using them to avoid them turning dark in the later pan-frying process. That’s the magic!!

However, if you want the chili oil to be crispy a little bit, then you should skip mixing the water. You can try both types and see which type is best for you.

how to make chili oil|chinasichuanfood.com

About the spices

In Sichuan cuisine, spices play important roles. If you visit a Sichuan-style restaurant selling Chongqing noodles, they use lots of herbs in the hot oil. It is ok to skip some of the spices but at least you need to prepare ginger, bay leaves, scallion white, star anise, Chinese cinnamon, Sichuan peppercorn, and cloves.

how to make chili oil|chinasichuanfood.com
how to make chili oil|chinasichuanfood.com

Instructions

Place around 1 cup of red pepper powder in a bowl. Mix in water if you prefer. Or you can skip this for a more crispy version.

Pour around 3 cups of oil into a wok, add scallion, coriander, white onion, and smashed ginger first because they contain water. Heat over a slow fire until the aromatics begin to wither.

how to make chili oil|chinasichuanfood.com

Continue heating with slow fire for another 6 to 8 minutes until the contents are all withered and browned.

how to make chili oil|chinasichuanfood.com

Take out all of the spices and aromatics.

how to make chili oil|chinasichuanfood.com

Heat the oil for another 2 or 3 minutes until slightly smoky. Pour 1/3 of the oil into the bowl.

how to make chili oil|chinasichuanfood.com

Mix to combine.

chili oil|chinasichuanfood.com

Repeat the above process twice to add all oil to the pepper flakes.

how to make chili oil|chinasichuanfood.com

Add toasted sesame seeds. You can also add toasted peanuts too.

how to make chili oil|chinasichuanfood.com

Keep the chili oil in an air-tight container and this can be kept for up to one month at room temperature.

chili oil|chinasichuanfood.com

This chili oil can be directly used in the following recipes.

how to make chili oil|chinasichuanfood.com

Chinese Chili Oil

A perfect Chinese chili oil combines strong aroma and bright red color
4.96 from 21 votes
Print Pin Rate
Course: Sauce and paste
Cuisine: Sichuan
Keyword: Chili oil
Prep Time: 10 minutes
Cook Time: 10 minutes
Total Time: 20 minutes
Servings: 20
Calories: 22kcal

Ingredients

  • 1 cup red pepper flakes ,Sichuan style pepper flakes is fried before curshing
  • 3 tbsp. water , optional
  • 2 tbsp. toasted white sesame seeds
  • 3 cups vegetable oil

Spices (it is ok to skip some of the spices, but keep the musts)

  • 1 thumb ginger ,must
  • 3 bay leaves ,must
  • 4 star anise ,must
  • 1 bark Chinese cinnamon
  • 3 scallion whites ,must
  • 1 tsp. Sichuan peppercorn ,must
  • 8 whole white pepper
  • 1 Amomum tsao-ko ,Cao Guo
  • 3 amomum kravanh ,White Dou Kou

Instructions

  • Place around 1 cup of red pepper powder in a bowl. Stir in 3 tablespoons of clean water. Combine and let the pepper flakes absorb the water. If you want a crispy version, then skip mixing in the water.
  • Pour around 3 cups of oil into a wok, add scallion, coriander, white onion, and smashed ginger first because they contain water. Heat over a slow fire until the aromatics begin to wither. Place all the spices in.
  • Continue heating with slow fire for another 6 to 8 minutes until the contents are all withered and browned. Take out all of the spices and aromatics.
  • Heat the oil for another 2 or 3 minutes until slightly smoky. Pour ⅓ of the oil to the bowl. Mix to combine.
  • Repeat the above process twice to add all oil to the pepper flakes. Add toasted sesame seeds.
  • Keep the chili oil in an air-tight container and this can be kept for up to one month at room temperature.

Video

Notes

The nutrition facts is calculated based on one bottom of the oil 

Nutrition

Calories: 22kcal | Carbohydrates: 2g | Protein: 1g | Fat: 2g | Saturated Fat: 1g | Sodium: 47mg | Potassium: 64mg | Fiber: 1g | Sugar: 1g | Vitamin A: 850IU | Vitamin C: 0.3mg | Calcium: 17mg | Iron: 0.6mg

Leave a Reply

Your email address will not be published. Required fields are marked *

Recipe Rating




This site uses Akismet to reduce spam. Learn how your comment data is processed.

91 Comments

      1. Dear Elaine,
        I always cooked the chili oil following your first recipe here, and it was very good. Thank you for teaching, first of all.

        But today I tried to cook chili oil, moisting the chili flakes acc.to new tip in the recipe, and my oil turn out…how to say…muddy color, not so clear cristall red as earlier.

        How do you think, what’s the problem?

        1. Catherine,
          With this new method, the pepper flakes may not be crispy anymore. If you want a crispy version, then you should skip the water.
          But let them combine for one or two days, and the color will turn out light and red. And the taste is different. You can define which one is your favorite.

  1. 5 stars
    Toasting and pounding the chili flakes is genius! I’ve made about twenty or thirty batches of chili oil so far, and this one came out more beautiful than any of the rest. I didn’t stir water into mine, because every time I’ve done that, the little pieces of chili flake and sesame seed that end up stuck above the oil line molded on me. I used the ginger trick instead, where you watch a fresh piece of ginger in the oil to see when it starts to turn brown and whither. I’ve done that before, but the oil never came out so lovely. It tastes great, too I’m just so happy with the color. I’m convinced that toasting and pounding the chili flake first makes a big difference.